开关寿命试验机
1、产品名称:开关寿命试验机
2、产品型号:AG058SE
3、标准依据:
IEC61058-1、GB 15092.1 《Switches for appliances –Part 1 : General requirements》 第17节要求
IEC62368-1:2018 《Audio/video, information and communication technology equipment Part 1: Safety requirements》附录G.1.2
IEC60335-1《Household and similar electrical appliances – Safety –Part 1: General requirements》第24.1.3节、附录H
IEC61010-1《Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements》第15.3节
BS1363-1 BS1363-1 《13 A plugs, socket-outlets, adaptors and connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugs》第18.1.1节
BS1363-2 BS1363-2《13 A plugs, socket-outlets, adaptors and connection units Part 2: Specification for 13 A switched and unswitched socket-outlets》第17.1.2节、第18.1.3
BS1363-3 BS1363-3《13 A plugs, socket-outlets, adaptors and connection units Part 3: Specification for adaptors》第18.1.4节
BS1363-4 BS1363-4 《13 A plugs, socket-outlets, adaptors and connection units Part 4: Specification for 13 A fused connection units switched and unswitched》第17.1.2节及18.1.1节
4、产品简介:
开关寿命试验机是广东安规检测有限公司根据标准IEC61058-1、GB 15092.1第17节、IEC60335-1第24.1.3节及附录H第17节、IEC62368-1附录G.1.2、IEC61010-1第15.3节、BS1363-1第18.1.1节、BS1363-2第17.1.2节、第18.1.3、BS1363-3第18.1.4节、BS1363-4第17节及18.1.1节要求设计制作而成,广泛应用于家电产品的开关寿命试验,同时也被广泛用于电器附件的开关寿命测试。该设备配置7寸彩色触摸屏、PLC控制,雷赛步进电机。该开关寿命试验机区别于传统的气动开关寿命试验机,四轴通过步进电机驱动,可以设置加速时间及减速时间,实际动作类似于人类操作开关,故具有噪音低、性能可靠、故障率低、行程可靠、误动作为零、判定测试结果无争议等优点。
5、规格参数
序号 | 项目名称 | 参数规格 |
1 | 设备电源 | AC220V、50Hz、600Wmax |
2 | 显示触摸屏 | 7寸维纶通彩色触摸屏 |
3 | 控制器 | 4轴信捷PLC |
4 | 步进电机 | 雷赛步进电机 |
5 | 开关速度 | 3~60次/分钟可预置 |
6 | 工位数 | 可以根据客户需求1~4工位定制,也可以根据客户开关类型定制 |
7 | 开次数 | 0-99999次可预置 |
8 | 可测开关类型 | 拨制开关、旋转开关、琴键开关、微动开关,也可以根据客户指定开关类型定制工位 |
9 | 机箱 | 冷轧钢板烤漆板与铝型材复合结构 |
10 | 外形尺寸 | 长1200mm×宽500mm×高710mm,以实际出货为准 |






IEC60884-1 开关寿命试验机(G.2.1)AG058SE

